Author Topic: Site Update Log  (Read 1902 times)

NCX

  • Administrator
  • Hero Member
  • *****
  • Posts: 536
    • View Profile
Re: Site Update Log
« Reply #30 on: December 30, 2018, 02:18:12 am »
Monoprice 33822 QHD

Added the Review by Tom's Hardware to my Best Reviewed Flicker Free 144hz 1440p Monitors buying guide.

Curved matte 2560x1440 144hz (48-144hz AMD Free-Sync range) VA panel with a height adjustable stand, 2x Displayport, 2x HDMI 2.0 and 3.5mm Audio Out.  It uses a curved, semi-wide gamut panel with minor over and under-saturation, as well as suffers from a preset blue tint and has slightly too low preset gamma resulting in slightly washed out colors and shades, but still still preset color accuracy for a budget panel.

Samsung C27HG70

Added the Review by PC Mag to my Best Reviewed Flicker Free 144hz 1440p Monitors buying guide.

Curved matte 2560x1440 144hz (48-144hz AMD Free-Sync range; limited to 100hz over HDMI) VA panel with a height adjustable stand, Displayport, 2x HDMI 2.0 and 3.5mm Audio In & Out, and 2x USB 3.0.  The Samsung uses a very accurate semi-wide gamut S-VA panel also offers decent HDR color space coverage (95% DCI-P3), and it comes with a fully adjustable stand and perceived black depth increasing dark matte grey bezel.  Setting the Response Time to Faster and Fastest actives back-light strobing or blur reductio which reduces motion blur, but may cause some people to suffer from health issues like headaches and/or eyestrain.  It has slower pixel response times than the 1080p C2xFG73 monitors, but they suffer from green and purple overshoot ghosting.

Samsung U32J590

Added the Review by Rtings to my Best Reviewed Flicker Free 32" 4K AHVA/IPS/PLS buying guide.

The Samsung uses a fairly accurate matte semi-wide gamut 32" 4K VA panel with AMD Free-Sync (40-60hz range supported by Displayport & HDMI), but isn't as accurate as the more expensive BenQ EW3270U, LG 32UD598 (non-wide gamut) and Philips  328P6VUBREB (28ms delay vs competitors low/negligible lag), and the Samsung uses LED PWM Dimming or Flicker when the brightness is set below 50%, as well as lacks a properly functioning sRGB mode to prevent wide gamut color over-saturation.  It has Displayport, HDMI 1.4, HDMI 2.0 (4K @60hz + Free-Sync support), and 3.5mm Audio Out.


« Last Edit: January 12, 2019, 01:27:38 am by NCX »