Author Topic: Monitor Reivew Update Log 2018-2019  (Read 47702 times)

NCX

  • Administrator
  • Hero Member
  • *****
  • Posts: 761
    • View Profile
Re: Site Update Log
« Reply #60 on: November 09, 2019, 02:55:45 pm »
Asus PA32UCX

Added the Review by Tom's Hardware to my Best Reviewed Flicker Free 32" 4K AHVA/IPS/PLS buying guide

Matte fully adjustable 3840x2160, wide gamut/HDR panel with Back-light Dimming, Displayport, Hardware Calibration (Asus ProArt which does not work properly), 3x HDMI 2.0, 2x Thunderbolt USB-C (1 In & 1 Out), 3x USB 3.1 and Uniformity Compensation which reduces the contrast and does not work very well.  The PA32UCX-K is quite accurate (2.14 out of the box gamma is disappointing), but needs to be set to the accurate but too red REC 709 (Tom's Hardware preset color accuracy section) or sRGB mode to prevent the over-saturation of SDR (HDTV/REC 709 & sRGB) content since the PA32UCX-K uses a an HDR-capable wide gamut panel which is preset to use the native DCI-P3/HDR color space, and unfortunately locks the color controls when the HDR mode is enabled.

The PA32UCX-K's color temperature changes and normalizes over a period of two hours when turned on after calibration, as well as suffers from varying color accuracy depending on how long it is turned on and which settings are changed.  The Asus has low input lag and fast pixel response times (for a 60hz non-TN panel) with minimal overshoot ghosting when the preset Trace Free 60 setting is used, and almost full HDR support thanks to the 1152 zone back-light dimming, 1500cdm/2 maximum brightness and wide gamut panel. The PA32UCX-K is a good 60hz gaming and media viewing display, especially once calibrated, but is not suitable for professional use over monitors from Eizo and NEC due to the Asus's improperly working hardware calibration (ProArt) and Uniformity compensation modes, and color-changing issues which occur over time after being turned on, and when settings are changed.


BenQ EX2780Q

Added the Review by Playwares to my Best Reviewed Flicker Free 144-165hz 1440p Monitors and Best Reviewed Flicker Free 27" 1440p AHVA/IPS/PLS buying guides.

Matte 144hz, 2560x1440, wide gamut (DCI-P3/HDR coverage) IPS panel (unsure if AHVA or IPS) with AMD Free-Sync, Displayport, 2x HDMI 2.0, a remote control, USB-C and 3.5mm Audio Out.  The BenQ is very accurate when set to the Standard and Rec 709 Picture modes; the Standard mode uses the native wide gamut which covers 94% of the DCI-P3/HDR color space and over-saturates SDR color (HDTV/REC 709 & sRGB) by 33% while the REC 709 mode accurately emulates the REC 709 color space without significant over or under-saturation and should be used when not viewing HDR content.  The BenQ has negligible input lag (<4ms measured with the SMT Tool) and fast pixel response times when the preset AMA High Response Time setting is used, but it's not as fast as IPS competitors like the LG 27GL850 which Playwares measured a 3ms pixel response average time compared to the BenQ's 6-7ms average.


Gigabyte Aorus FI27Q

Added the Review by It Hardware PL to my Best Reviewed Flicker Free 144-165hz 1440p Monitors buying guide.

Fully adjust-able matte 2560x1440, 165hz wide gamut/HDR IPS panel with AMD Free-Sync, Displayport, 2x HDMI, 2x USB 2.0 and 3.5mm Audio In & Out.  The FI27Q over-saturates the color of SDR (HDTV/REC 709 & sRGB) out of the box by over 30% since it has a wide gamut panel which tries to cover the DCI-P3 (HDR) color space.  The sRGB emulation mode of the unit IT Hardware tested is good while the FI27Q Belgium Hardware tested significantly reduces the gamma and RGB level color accuracy (Standard versus sRGB), as well as looks washed out since the sRGB mode's gamma is too low.  The FI27Q has negligible input lag and less (2.7%) overshoot ghosting than the AD27Q (20%), but slower pixel response times resulting in more color streaking or ghosting.
« Last Edit: November 10, 2019, 11:08:25 am by NCX »